Thursday, November 6, 2008

Boring a well homemade

A ásonyomot dig out from the land, and an metre 40 müanyag is afraid csővet stop up into the drill, I in a present evening a hiltit I was useful mert annak erősebb a motorja and turns more slowly.The müanyag pipe in one the drill tool the end of which 45-fokban he is cut off. This half of the metre müanyag pipe is needed with the drill to plot. There will not be need quasi already then onto the drill.

Then the ásonyomba put a 110 half metre müanyag pipe, and we put a 110/50 T-piece into this. To the outflow of the T-piece a müanyagládát (let this be at least 50 litre one) lay.

The next step that we put a diving pump into it the vizzel full müanyagládába and we join that of leading out a 40 one 90-fokos müanyagsarokkal, to which one a procession one inserting lay, and of course an cca. 2-3 metre garden hose. And our pump is joined already in this manner the fúrúcsővel. Not big ördöngősség, worthy to try, because you will have a well in this manner homemade.

Elinditjuk the pump, and the drill tool that is the pipe (now already 2-méteres we use pipes), we move it onto right, left, we are prodding it gently meanwhile downwards. The viz then on the 110/50 pipe with the washed land, you are with the sand flows the müanyagládába. We stand a small one sometimes, and we leave it that the viz kiöblitse the soil layer. The öblités we make it bob up and down gently meanwhile the fúrórudazatot(müanyag pipe). This then the first 2-méteres we will feel it after a pipe, that when necessary.

When 2 are the first ones-méreres a pipe went down, then hőlégfúvóval megmelegitjük the next pipe, we smear the end of the previous pipe then müanyagragasztóval and the next pipe ráigazitjuk. We make it connect to it again the pump and we may go already with the drilling downwards newer 2-métert. Then again stick and in this manner long. And for what I hope may be a well of yours if you did not give it up yet homemade.

We allow it continuously meanwhile of course the müanyagládába the water because plot downwards some from the chest the viz, which it is necessary to replace, is running out. We take the sand out occasionally from the bottom of the müanyagláda.

The first vizzáróréteg is on 6-8 metres. Here sudden eltünik the viz the müanyagládából, when we attain this layer. It is necessary to spend it then quickly, and yet legalabb to bore 1,5-2 metres downwards. If this is the depth suits, we stop the drilling then. Let down pl: we bind an iron ball onto the string until the splash, after it on a string a csomól, and we wind up the iron ball, we may check the depth of the well furthermore after 1-2 clocks with the bullet with this we may look at it how is found this yet our water. If he is found then we pull it out the csővet and it ahead elkészitett filter we stick it to it and we push it back.

I AM WATCHING IT! Between the pulling out of the pipe and pushing him back at what let shorter time pass. If the pipe is too long cca. 7-50 metres then kihuzáskor onto a discretionary size can be cut (kb: 5-7 metres) the pushing back it is necessary to glue it together again though. If this far got everything will be a well of yours under own management certainly.

Next step that the bought 40 valve stick onto the end of the pipe, we may place the neat pump upon it then. The viz will be a little bit sandy initially, but this clears up rather soon.

Congratulate your good work, you have a good well certainly homemade already now.

The well filter under own management elkészitése
An 2 metre 40 müanyag csővet punch a hole, that is 8mm-es we pierce it with drill, but let us omit 25-25 cm pieces on both of his ends. We buy well fabric and rátekerjuk the müanyagcsőre this you are rögzitjük with a handcuff with wire. The lower end of the pipe levakdugozzuk.

Ui: If you read it carefully and you have a little cleverness then you find it out to do the boring a well homemade.